Cleveland's Concrete Floor Surface Authority

Welcome to Cleveland Epoxy & Coating Pros, the definitive authority on concrete preservation in Northeast Ohio. We don't just paint floors; we engineer permanent surface solutions designed to withstand the unique rigors of the "North Coast" environment. From the hydrostatic pressure typical of Parma’s clay-heavy soil to the corrosive road salts used by ODOT on I-480 and I-71, your concrete is under constant attack.

Our mission is simple: to provide Cleveland homeowners and business owners with a flooring system that is chemically resistant, UV-stable, and mechanically bonded for life. Whether you need a rapid 24-hour garage transformation in Strongsville, a waterproof metallic basement floor in Lakewood, or a USDA-compliant commercial kitchen coating in Solon, we deliver industrial-grade protection that big-box store DIY kits cannot match.

Specialized Concrete Floor Coating Solutions

We treat every floor as a unique entity with specific requirements based on its usage and location. We offer three distinct systems, each engineered for specific performance metrics.

The Polyaspartic Garage Floor Coating System (The "1-Day" Shield)

The Problem: Standard epoxy becomes brittle in Cleveland's freeze-thaw cycles (expanding and contracting until it cracks). It also yellows rapidly when exposed to UV light from open garage doors.

Our Solution: We utilize a Polyaspartic Aliphatic Polyurea system. This is the same technology used on bridge decks and aircraft hangars. It is 4x stronger than epoxy, 100% UV stable (will never yellow), and flexible enough to expand with your concrete during our sub-zero winters. Best of all, it cures in hours, not days. You can park your car on it 24 hours after we finish.

Metallic Epoxy Floor Coating System (The 'Exotic' Pour)

The Problem: Basements in areas like Independence and Brecksville often suffer from moisture vapor transmission, leading to musty smells and peeling stick-on tiles.


Our Solution: Our Metallic Epoxy system acts as a monolithic moisture barrier. We use metallic pigments suspended in clear resin to create a 3D, marbleized effect that is completely unique to your home. It is seamless, waterproof, and antimicrobial—perfect for turning a damp basement into a luxury living space or "Man Cave."

Commercial & Industrial Floor Coating System

The Problem: Warehouses and retail spaces in Brook Park and Westlake need floors that meet OSHA slip-resistance standards and can withstand forklift traffic.


Our Solution: We install high-build Epoxy Mortar and Quartz systems designed for extreme abuse. These floors are USDA-approved for food production, resistant to chemical spills (acids, oils, solvents), and can be textured with aluminum oxide for maximum grip, ensuring the safety of your employees and customers.

The 5-Step Installation Protocol (The Science of Adhesion)

Note to Reader: This is where 90% of floor failures are prevented. The "Guy with a Truck" skips these steps. We never do.

To achieve a mechanical bond that lasts for decades, we strictly adhere to the Concrete Surface Profile (CSP) standards set by the International Concrete Repair Institute (ICRI). We do not "clean" the concrete; we fundamentally alter its structure.

Step 1: Moisture & Hardness Testing

Diagnosis: Before a single machine touches your floor, we conduct a relative humidity test and a Mohs hardness scratch test. In areas like Parma and Lakewood, the clay soil often forces moisture up through the slab (hydrostatic pressure). If we detect moisture levels above 4%, we switch to a specialized Moisture Vapor Barrier (MVB) base coat to prevent future delamination/bubbling.

Step 2: Diamond Grinding (Profiling)

CSP-2 Standard: We do not use acid etching. Acid is a DIY method that introduces water to the slab and fails to remove tire glaze or sealers. We use industrial planetary grinders weighing 600+ lbs, equipped with 30-grit PCD (Polycrystalline Diamond) tooling. This physically removes the top layer of "cream" and opens the pores of the concrete, achieving a rough texture similar to 100-grit sandpaper (CSP-2). This texture is the "key" that locks our coating into the slab.

Step 3: Mending & Reconstruction

The Monolithic Surface: Concrete cracks. It’s a fact of life in Ohio. We chase every crack with a diamond blade to clean it out, then fill it with a rapid-set Polyurea mender. This material is stronger than the concrete itself. We also rebuild spalled expansion joints and pitted salt damage, ensuring the final floor is perfectly smooth.

Step 4: The Base Coat & Broadcast

The Chemical Bond: We apply a 100% solids self-priming base coat that "wicks" deep into the open pores we created during grinding. While this layer is wet, we broadcast UV-stable vinyl flakes to "rejection" (100% coverage). This creates the stone-like look and adds a layer of impact protection.

Step 5: The Polyaspartic Armor

The Shield: After scraping and vacuuming excess flakes, we apply the clear Polyaspartic topcoat. This is the "armor." It is chemically resistant to gasoline, oil, antifreeze, and—most importantly—road salt. It provides a high-gloss, glass-like finish that is impermeable and easy to clean.

As a locally operated company, we proudly serve neighborhoods and commercial areas across Cleveland, including locations near major landmarks such as Progressive Field, Cleveland Metroparks Zoo, Rocket Mortgage FieldHouse, MLK Drive, Cleveland Metroparks, the Rock and Roll Hall of Fame, and properties connected by major highways like I-90, I-71, and I-480. Our deep understanding of Cleveland’s climate, industrial activity, and residential needs allows us to recommend the right flooring solution for every space—from high-traffic warehouses and auto shops to residential garages and basements. Cleveland Epoxy & Coating Pros is committed to delivering reliable, professional concrete flooring solutions throughout the Cleveland service area, making us the trusted epoxy and concrete coating company near you.