Sand Broadcast & Quartz Epoxy Flooring: The Gold Standard for Industrial Safety
In environments where oil, water, or chemicals are frequently present on the floor, a standard smooth epoxy coating is a liability. For Cleveland’s commercial kitchens, automotive bays, and food processing plants, Sand Broadcast (Quartz) Epoxy is the essential solution. This high-build system incorporates layers of fine silica or decorative quartz aggregate into the resin, creating a rugged, sandpaper-like texture that provides maximum grip and extreme impact resistance. At Cleveland Epoxy & Coating Pros, we specialize in "Double Broadcast" systems that ensure 100% coverage and a lifetime of performance in the most demanding environments.
The "Double Broadcast" Advantage: Why Thickness Matters
In our experience, a "single broadcast" is a common shortcut that leads to premature floor failure.
- The Process: We apply a base coat and immediately "broadcast" sand or quartz to excess until the floor is saturated. Once cured, we sweep the excess and repeat the process.
- The Result: This creates a floor that is nearly 1/8 to 1/4 inch thick. This isn't just a coating; it is a new structural wear-layer that can withstand heavy dropped tools and constant forklift traffic that would shatter thinner systems.
Quartz vs. Silica: Aesthetic vs. Utility
- Silica Sand Broadcast: Primarily used in "back-of-house" industrial areas where utility and cost are the priority. It provides an aggressive non-slip texture with a solid color finish.
- Decorative Quartz: Utilized in public-facing areas like locker rooms, hospital hallways, or school bathrooms. It offers the same safety benefits but uses multi-colored ceramic-coated quartz granules for a "granite-look" aesthetic.
Experience-Based Quality: Sanitary Coving & Hygiene
For local businesses subject to health inspections (like breweries or food prep areas), the floor-to-wall transition is critical.
- Sanitary Cove Base: We don't just stop at the floor. We install a "radius cove" that curves the epoxy 4 to 6 inches up the wall.
- Experience Marker: This eliminates the 90-degree corner where bacteria and mold typically hide. When you power-wash your floors, the water and debris flow seamlessly toward the drain, meeting the highest USDA and FDA standards.
Frequently Asked Questions
What is sand broadcast epoxy?
It is an epoxy system where sand or quartz aggregate is thrown into the wet resin until it is fully "broadcasted." This is usually done in multiple layers to create a thick, textured, and incredibly durable floor.
Why is quartz used in epoxy flooring?
Quartz is used because it is an extremely hard mineral that increases the floor's compressive strength and impact resistance. When ceramic-coated in different colors, it also provides a beautiful, decorative finish that hides dirt and wear.
Is sand broadcast epoxy slip-resistant?
Yes. It is one of the highest-rated slip-resistant floors available. Because the texture is integral to the system (not just a topcoat additive), the slip resistance remains consistent even as the floor wears down over decades of use.
Built for the Toughest Environments
Don't compromise on safety or durability. From industrial plants in the Flats to commercial kitchens in Ohio City, our sand broadcast systems provide the traction and strength your facility needs to stay compliant and productive.
Ready for a high-traction solution?
Request a Technical Consultation & Sand Broadcast Quote